Setting Up Ham Radio Deluxe CW Mode with Winkey and FT-857D Transceiver

As a ham radio operator, setting up the correct communication settings is crucial for efficient and effective communication. One of the most important settings to get right is the Com Port configuration in Ham Radio Deluxe (HRD) when using the Winkey II device. In this article, we will walk you through the step-by-step process of configuring your Winkey II to key your FT-857D transceiver for CW mode.

First, open HRD and navigate to the 'Com Port' tab on the top of the dialog box. From the left menu, select 'Modes IDs'. This is where you'll configure the Com Port settings for your Winkey II device.

Next, ensure that your radio is set to CW mode in the DM-780 Program Options. You may need to experiment with different 'Break-In' settings (Full or Semi) or whatever options are available on your radio. In our example, we used an FT-857D transceiver, but most settings should be compatible with other radios.

The following setup is typical of the Winkey II configuration screens used in HRD. By following these steps, you'll be able to set up your Winkey II for CW mode and get started with ham radio communication.

In conclusion, configuring the Com Port settings in HRD's 'CW' tab is a crucial step in setting up your Winkey II device for CW mode. With this setup, you'll be able to key your FT-857D transceiver and start enjoying the benefits of ham radio communication. Remember to experiment with different settings if needed to ensure optimal performance.

Ham radio deluxe cw